⇒ HURRICANE. Up to d97 3-5 microns:
This is ANIVI’s latest development. It gathers all the advantages of the Centriconic model plus the feature that it can produce materials with top cuts around 3 microns. It has high efficiency, low maintenance and low power consumption. Its refined design offers a reliable and safe operation. Specially designed to work with calcium carbonate.
⇒ CENTRICONIC. Up to 8 microns:
ANIVI classic air separator. Over 30 years of experience guarantee the performance of this classifier working around top cuts of 10 micron. The particle size parameters can be changed by remote control without interrupting the operation. It has high efficiency, lower power consumption and low maintenance. Specially designed for ultrafine classification.
⇒ NSA. Up to 35 microns:
Highest evolution of the performance of ANIVI classifiers with mechanical feeding. It has a double rotor coupled with the fan blades and the distribution plate. You can regulate very precisely the top cut with this device. Besides this, you can change the parameters of the classifier by remote control without interrupting the operation.
That’s why this classifier is strongly recommended for materials with top cuts of 35 microns and above, and plants which require frequent changes of fineness. Its typical applications include abrasive materials and it allows the installation of different type of linings if to prevent the ferric contamination is required.
⇒ ANIVI-STURTEVANT. Up to 55 microns:
It’s used to reduce the filler content in the sands for concrete and mortar production. Easy operating, it can handle high circulating loads in an autonomous way by just feeding properly the machine in the upper section and collecting the filler and the cleaned sand from below. It’s recommended if not man fineness changes are required, because you need to stop the machine to change the internal settings of some parts.